Jun 1 2010 08:32:07 : %ACE-1-106028: WARNING: Access rules memory exhausted while processing merged list. Incomplete rule is currently applied on interface vlan533. Manual roll back to a previous access rule configuration on this interface is needed
We have tried to remove and reaply the policy containing access-list to VLAN interface and to redefine the VLAN interface, as recommended in the docs, but still have the ssh issue.
Also show resource usage shows no sign of resources beeing exhausted:
There have been 4 contexts, each of them had 20 percent of ACL memory reserved. We have changed that in resource-class to 10 percent, recreated policy-map on affected interface and it shows number greater than zero for Max of acl-memory resource (Admin ctx).
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...