Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Bronze

ACE and MS-SQL Probe

Need some help on why my SQL Probe is not working. Thx

probe tcp MS-SQL

description TO-RBSQL1

ip address 10.15.160.3

port 1433

interval 2

faildetect 2

passdetect interval 2

passdetect count 2

rserver host RBWEB1

ip address 10.15.177.11

rserver host RBWEB3

ip address 10.15.177.13

inservice

serverfarm host RBWEB

description TO-VLAN-177-RBWEB-SERVERS

predictor leastconns

probe WWW-RISKBROWSER

probe PING

rserver RBWEB1

rserver RBWEB3

inservice

Ace1/RISKBROWSER# sh probe MS-SQL

probe : MS-SQL

type : TCP, state : ACTIVE

----------------------------------------------

port : 1433 address : 10.15.160.3 addr type : TRANSPARENT

interval : 2 pass intvl : 2 pass count : 2

fail count: 2 recv timeout: 10

--------------------- probe results --------------------

probe association probed-address probes failed passed health

------------------- ---------------+----------+----------+----------+-------

serverfarm : RBWEB

real : RBWEB1[0]

10.15.160.3 0 0 0 DISABLED

real : RBWEB3[0]

Ace1/RISKBROWSER# 10.15.160.3 21 21 0 FAILED

1 REPLY
Cisco Employee

Re: ACE and MS-SQL Probe

This is a simply TCP probe.

If it is down, only one reason : the server did not respond or responded with a RST.

Get a sniffer trace and check what the server does.

Gilles.

530
Views
0
Helpful
1
Replies
CreatePlease to create content