Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE authentication through windows NPS server

Hi,

I have 4700 series ACE appliance with A5 (2.2). I have below configuration in ACE for authentication through windows NPS

radius-server host 10.36.32.89 key 7 "xxxxxxxxxxx" auth-port 1645 acct-port 1646 authentication accounting

aaa group server radius RADIUS

  server 10.36.32.89

  deadtime 15

aaa authentication login default group RADIUS local

aaa accounting default group RADIUS local

I have opened udp ports 1645 and 1646 from ACE to NPS server.

Is any setting needed on windows NPS server for ACE authentication?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

ACE authentication through windows NPS server

Hi Nishchay,

The configuration you have pasted regarding "Radius" seems to be fine but not sure about NPS. But there have been similar discussions before and i am pasting links for your reference. Visit link number 2. One gentleman has even recorded the settings to be done on NPS and posted it. Hope it helps.

https://supportforums.cisco.com/thread/2030593

https://supportforums.cisco.com/thread/217678

https://supportforums.cisco.com/message/463627#463627

Regards,

Kanwal

3 REPLIES
Cisco Employee

ACE authentication through windows NPS server

Hi Nishchay,

The configuration you have pasted regarding "Radius" seems to be fine but not sure about NPS. But there have been similar discussions before and i am pasting links for your reference. Visit link number 2. One gentleman has even recorded the settings to be done on NPS and posted it. Hope it helps.

https://supportforums.cisco.com/thread/2030593

https://supportforums.cisco.com/thread/217678

https://supportforums.cisco.com/message/463627#463627

Regards,

Kanwal

New Member

ACE authentication through windows NPS server

Hi Kanwaljeet,

Thanks for your reply. The links provided by you were really useful and resolved my issue.

I followed the instructions in third link and created vendor specific attribute in NPS server which resolved the issue.

Regards

Nishchay Nadkarni      

Cisco Employee

ACE authentication through windows NPS server

Hi Nishchay,

I am very glad to hear that:)

Regards,

Kanwal

792
Views
0
Helpful
3
Replies