I have ace load balancing for two DNS servers in our infrastructure, we may add more in the future. I am looking for configuration examples or best practices to get the best performance. I have attached the sample config. There is some config ommited. We have two ace modules in separate DR server rooms.
I am noticing a lot of connections seem to stay connected for a long time and timeout eventually. I have reduced the timeout to reduce this and it seems to have improved the situation. I am struggling to work out how to get UDP fast aging or UDP booster working in my scenario.
Any ideas or suggestions of how to improve are welcome.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...