Hi - have just started a initial configuration on a new ACE running A2 software. I have configured a bridging SLb farm. I can connect to the VIP when the client is on the L2 bridged VLAN however cannot connect to the VIP when I am in a routed VLAN off my sup. It seems I am missing something obvious. is there any sample config for this or can someone point me in the correct direction. Thx
Make sure the ACE has a default route configured on it. I had this problem, customer wanted to not have any sort of routing on the ACE or FWSM, but my understanding is that the TCP connection is made to the ACE, and then from the ACE to the server farm, therefore the ACE needs a route out of it's own VLAN.
Forcing SVI 52 to stay shutdown (SVI 50 tied to line card in slot 8.)
Interface vlan 50 is the interface used for mgmt of the ACE. I had a route to the VIP's using the mgmt interface on the switch - somehow this needs to be a directly connected network. I have attached the relevant config to a reply to any earlier request in this conversation.
I have got this working - but I'm not 100% in the correct method. What I found was that I didn't have the "access-group input ACL1"
applied under my vlan 50 (mgmt interface) on the ACE. When I apply this I can route to my bridged subnet successfully from my MSFC. However I am not sure of the performance impact of this. Also it means I might have to add multiple static routes to my mgmt interface on the MSFC. I will take a look at the command you have provided to see what it does. Thanks
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...