Mod Online Diag Status ---- ------------------- 2 Pass 3 Pass 4 Pass 5 Pass 6 Pass 8 Not Applicable 9 Not Applicable
Here's the problem:
On the standby switch 2, the ACE module keeps rebooting. I first thought may be the power was not sufficient, so I checked the power utilization, and I have about 425 watts available.
I shut the power to one of the 10/100/1000 line card and I still had the same problem.
I moved the ACE module to SW1, trying to see if it would follow the problem and it did not have any issues.
I shut down two (2) modules on switch 2, and I still have the same problem.
Here's the log:
odulee sm(cygnus_oir_bay slot9), running yes, state wait_til_online Last transition recorded: (disabled)-> stay_disabled (operator_power_on)-> can_p ower_on (yes_power)-> powered_on (real_power_on)-> check_power_on (timer)-> chec k_power_on (power_on_ok)-> wait_til_online (reset_timer_online)-> wait_til_onlin e (reset_timer_online)-> wait_til_online (reset_timer_online)-> wait_til_online (reset_timer_online)-> wait_til_online xit N-MSFC-VDR1-PRI# Dec 19 13:14:50 UTC: %C6KPWR-SW2_SPSTBY-4-DISABLED: power to module in slot 9 se t off (Module Failed SCP dnld) Dec 19 13:14:52 UTC: %SYS-5-CONFIG_I: Configured from console by console
Thank you very much for all your inputs. I am planning on testing it in our lab, so I can schedule the activity to upgrade the software. I had a feeling it was a software mismatch/upgrade, but I wasn't sure which system (ACE/VSS) was the cause.
Now I can go and research the Port channel problem we encountered the same evening. I never seen a problem when you have mis-match QoS to cause the Port Channel not to establish.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...