Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE cli alias configuration

is there any possibillity to cinfigure an cli alias on ACE ?

I am wondering that a "show alias" is possible:

ACE/Admin# show alias
CLI alias commands
==================
ACE/Admin#

but the "normal" alias configuration doesn´t work, eg:

ACE/Admin(config)# cli alias name shint show interface
                              ^
% invalid command detected at '^' marker.

I use the following SW:

Cisco Application Control Software (ACSW)
  loader:    Version 12.2[120]
  system:    Version A2(1.4a) [build 3.0(0)A2(1.4a) adbuild_12:09:43-2009/04/08_/auto/adbu-rel2/rel_a2_1_4_throttle/REL_3_0_0_A2_1_4A]

thx

6 REPLIES
Silver

Re: ACE cli alias configuration

Hi,

I don't think that ACE supports alias commands.

Indeed, the show alias command works, but is a hidden commandP:

ACE/Admin# show  a
aaa          access-list  accounting   acl-merge    arp
ACE/Admin# show  alias
CLI alias commands
==================
ACE/Admin#

also in config mode, no command to configure aliases.

Looking in the command reference guide, no alias commands either.

So I don't think you can create alias commands (maybe in the future?)

I'm running A2(2.2)

HTH,

Dario

Cisco Employee

Re: ACE cli alias configuration

Hi,

Though ACE software works on Linux kernel 2.4, it does not have all the linux functionality.There is no Alias command. Even if i login to the kernel mode, you will not have a alias command.

Thanks

Venky

New Member

Re: ACE cli alias configuration

I know that "show alias" is a hidden command, so I thought there are also hodden config commands

Cisco Employee

Re: ACE cli alias configuration

The CLI code is shared between different devices.

The 'show alias' is something we forgot to remove.

switch/Admin# show a?
aaa          access-list  accounting   acl-merge    arp
switch/Admin# show a

However, as can be seen above, this is normally a hidden command.

There is no option to create alias on ACE

Thanks,

Gilles.

New Member

Re: ACE cli alias configuration

so it´s possible to misuse the script functionality to define some "alias" ?

... or can I start the "script procedure" only in configured probes ?

Cisco Employee

Re: ACE cli alias configuration

there is no alias on ACE.  The command 'show alias' will be removed. (it is currently just hidden).

Script can only be called from probes.

Gilles.

593
Views
0
Helpful
6
Replies
CreatePlease login to create content