I need some configuration to provide site stickiness with the Help of ACE running in two different sites.
DNS functionality is handovered to the GSS
Once a DNS A record is given back to the user for www.company.com and the request is made to the ACE, the ACE will send a http redirect back to the user for a new domain name of www1.company.com or www2.company.com for the respective
sites, the user was initial sent to via the DNS response. This insures that the user will alwaysreturn to the same site.
clinet to the GSS ---> www.mycompany.com hits the Site A (18.104.22.168) the ACE shall redirect the client request to WWW1.MYCOMPANY.COM and further request from the client should stick to the same site till it completes the session i.e www1.mycompany.com.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...