Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACE: conn-limit by source?

Is it possible to limit the number of concurrent connections to a set number per source IP?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ACE: conn-limit by source?

You can have the same rserver in different serverfarm. That's no problem.

Only drawback is that the same probes will be run for each serverfarm.

Gilles.

3 REPLIES
Cisco Employee

Re: ACE: conn-limit by source?

no.

Unless you know the ip address you want to limit.

In this case, you can match that traffic with a class-map and use a separate serverfarm for each ip where you can specify a conn-limit.

Gilles.

New Member

Re: ACE: conn-limit by source?

As they are the same servers, wouldn't this mean having the same servers in different serverfarms? I believe this is not recommended, is this the case?

Thanks

Cisco Employee

Re: ACE: conn-limit by source?

You can have the same rserver in different serverfarm. That's no problem.

Only drawback is that the same probes will be run for each serverfarm.

Gilles.

363
Views
0
Helpful
3
Replies
CreatePlease to create content