I'm running an ACE20K9 running Version A2(1.0) [build 3.0(0)A2(1.0) IOS.
I am load balancing 3 NON-SSL terminated servers in a server farm. My systems guys have configured, unknown to us, 2 separate sharepoint sites, using the SAME VIP, resolving to the 2 different sites (exp: mgmt-x3d-des.dsa and user-x3d-beta-des.dsa, both intranet)...
I dont know if its the configuration of the dual sites resolving to the same VIP or what, but something is manifesting itself as 2 connections per initiated connection...see the below "sho conn"
2215 1 in TCP 2001 10.159.229.158:6907 10.78.128.32:80 ESTAB 3395 1 out TCP 2002 10.78.160.26:80 10.76.241.6:15321 ESTAB 3114 2 in TCP 2001 10.159.229.158:6908 10.78.128.32:80 ESTAB 1713 2 out TCP 2002 10.78.160.26:80 10.76.241.6:56046 ESTAB
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...