ACE - Do I need a L7 policy to configure L4 load-balancing
Hi - I simply need to load balance TCP traffic to a specific port to 2 servers in a serverfarm. There is nothing in the documentation that states how to associate a serverfarm with a policy. The only documentation I can find which explains how to associate a serverfarm with a policy is if you configure a L7 policy - Do I need to configure a L7 policy even if I just want to do L4 load balancing?
I'm sure I must be missing something simple but I've been through the docs at length and I cn't find any config examples on CCO
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...