ACE eliminate insertion of http-header in some case
I would suggest you to do a SPAN session of the internal TenGig interface connecting the ACE with the switch backplane. Seeing the differences between the working and failing scenarios will probably give you some hints on why the header insertion is not working.
If you need help to analyze the traffic capture, you can always open a TAC case
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...