Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACE Equivalence of CSM "owner" and "contact"?

I'm converting existing CSM configs to ACE4710. CSM has owner and contact config such as:

owner Web-Server

  contact-info IT

Is there equivalent commands in ACE4710?

Thanks

2 REPLIES
Hall of Fame Super Silver

Re: ACE Equivalence of CSM "owner" and "contact"?

There's not really an equivalent concept in the ACE. See the CSM-to-ACE Conversion tool guide for a Cisco source. The best analogy they cite is the use of contexts on the ACE, if desired but contexts are much more than the owner conept in CSS/CSM terminology.

New Member

Re: ACE Equivalence of CSM "owner" and "contact"?

Thanks for the info. I have another question about CSM command "predictor forward". In the current CSM config, one server farm is configured with predictor forward for direct access to real servers. How can I configure the same function in ACE so if the traffic is direted to the real server IP addresses (not the client VIP), it can be forwarded directly without going through load balancing algothrims?

Thanks again

227
Views
0
Helpful
2
Replies
CreatePlease to create content