Yes you can achieve this on the ACE if you disable preemption from FT groups so that when a failover occurs, the higher priority ACE will not force the Standby ACE to failover back to it. Without 'preempt', the priorities only apply if both ACE4710 were rebooted at the same time and had to negotiate who becomes Active first.
Thanks, that's a good document; it got us on the right track.
Now the ACE behaves the way we want.
Actually some extra access-lists is needed, we put them in the switches.... This is needed to block ICMP echo from ACE, since the probe will continue to ping the failing gateway using the source IP of the interface where it has its default gateway configured when a connected vlan interface is down.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...