Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ACE FT Design

Hi,

We have 2 ACE modules on 2 6500 Catylyst swithces(those are not connected directly). To acieve FT design do we need to cross connect these 6500 swicthces? Both 6500 switches are uplinked to GW routers and those GWs are cross connected.

Just wondering with out Cross connecting 6500 switches , can we achieve FT for ACEs?

Thanks

syaksha

3 REPLIES
Silver

ACE FT Design

The 2 ACE modules must be L2 adjacent.

Af they aren't, trying to make HA is just a nonsense.

Community Member

ACE FT Design

The Current CSM FT running on the design which explained above, We will be replacing CSM with ACE soon. SO we need to cross connect 6500 switches to achieve FT in ACE?

Silver

Re: ACE FT Design

Not mandatory, if VLANs are extended through your GW routers, it will be ok.

If it works with CSM, it should work with ACE.

281
Views
0
Helpful
3
Replies
CreatePlease to create content