I'm trying to configure redundancy on ACE module, and I don't see the relation between the FT groups and the FT TRACK HSRP on the configurations examples. I mean, how does the FT group knows that it is affected just because an FT TRACK has become true ?
The ft group will be configured in the admin context and e.g. looks like this.
ft group 1
peer priority 100
Within the context FOO you configure the HSRP TRACK.
ft track hrsp HSRP-Track-FOO
peer priority 45
In an event of failure for the tracked group on the active member the priority will be decreased by the amount specified in the track group. So the active priority will be below the standby priority and therefore trigger a switchover.
That is at least what the documentation says. The other way around it will probably increase the priority by the amount of the peer prio.
Have a look at the link it probably explains it better. :)
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...