I need some detailed information regarding ACE health monitoring. According to the documentation, ACE support 4096 Unique probe configurations.
My questions are as follows:
1) Are these uniques configs means uniques instances or unique probes. For ex: If I have created 2 probes(say http and icmp probe) and have applied each of it to 5 rservers, does that mean I have 2 unique configs or 10.
2) How did this number(4096) came in. What is the logic behind it. Is it based on the memory allocated by ACE to health monitoring. Please provide a detailed answer to this question.
Can you please elaborate on the Control Plane Capacity. From the hardware I can see that there is 2G capacity between the CDE switch and the control plane. I want to know how did the number came in. What is the calculation behind it?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...