Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

ACE Health probe for SIP

I've setup a SIP probe to check the health of a Microsoft OCS. The health of this server is always failed. What am I missing? I also tried it with a telnet probe on port 5061, but got the same result. A telnet from ACE to the server on port 5061 works fine.

See below a show probe SIP detail and the relevant configuration.

ACE21_Secondary/MOCS# sh probe SIP det

probe : SIP

type : SIP

state : ACTIVE

description :

----------------------------------------------

port : 5061 address : 0.0.0.0 addr type : -

interval : 10 pass intvl : 10 pass count : 3

fail count: 3 recv timeout: 4

request-method : OPTIONS

conn termination : GRACEFUL

expect offset : 0 , open timeout : 2

expect regex : -

------------------ probe results ------------------

associations ip-address port porttype probes failed passed health

------------ ---------------+-----+--------+--------+--------+--------+------

rserver : OCS_11

10.105.11.70 5061 -- 7566 7566 0 FAILED

Socket state : CLOSED

No. Passed states : 0 No. Failed states : 0

No. Probes skipped : 0 Last status code : 0

No. Out of Sockets : 0 No. Internal error: 0

Last disconnect err : Server reply timeout (no reply)

Last probe time : Thu Oct 30 14:18:42 2008

Last fail time : Tue Oct 28 16:31:30 2008

Last active time : Never

ACE21_Secondary/MOCS# sh run

probe sip tcp SIP

port 5061

interval 10

passdetect interval 10

receive 4

expect status 200 200

open 2

rserver host OCS_11

ip address 10.105.11.70

probe SSL

probe PING

probe SIP

probe SIP_TELNET

inservice

Cheers

Peter

1 REPLY
Cisco Employee

Re: ACE Health probe for SIP

Peter,

make sure to NOT run version A2(1.1a) as SIP probes are broken in that specific release.

If your version is something else, get a sniffer trace on the server to see what is going on.

Seems like we don't get a reply according to the line :

"Last disconnect err : Server reply timeout (no reply) "

Gilles.

571
Views
0
Helpful
1
Replies
CreatePlease to create content