ACE: http profile that adds a request header to all HTTP requests
Following is what has been configured so far:
probe http url.test.com:1111
passdetect interval 60
expect status 200 200
header Host header-value "ssl"
serverfarm host url.test.com:443
description url.test.com - Port 1111 ***
rserver server1.test.com 1111
rserver server2.test.com 1111
class-map match-any url.test.com:443
2 match virtual-address 192.168.1.1 tcp eq https
policy-map type loadbalance first-match url.test.com:443
policy-map multi-match LOAD_BALANCE
loadbalance vip inservice
loadbalance policy url.test.com:443
loadbalance vip icmp-reply active
ssl-proxy server SSL_Offload
above is my config with ssl offloading. I've to configure following..
When setting up your load balancer, you must define an HTTP profile that adds a request header to all HTTP requests. You must assign this HTTP profile to e! ach of the virtual server names in this section which receive a request which is of th! e type HTTPS.
The HTTP profile inserts the following request header:
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...