Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

ACE ICMP probe

Hi,

I have a strange behavior on a ACE blade :

The blade is configured in bridge mode, when a configured reals server, if they are on the same site, the probe is ok, if they are on another site, the probe is failed.

What I found is that the echo reply on the PO of the blade is padded with 23 bytes of "0" only for the probe.

This is really strange...

the version of the blade and ios:

blade : 3.0(0)A1(4a)

Sup (720): 12.2(18)SXF8

I found on the forum that it could be related to the PFC3b but I don't see how I could try to bypass it.

Thanks for your help ;-)

1 REPLY
Cisco Employee

Re: ACE ICMP probe

I understand the reply will come on some ethernet module and be forwarded into the ACE PO.

So, what is the the ethernet hardware module type ? 'show mod'.

Could you also give us the trace so we can look at the icmp packet.

Thanks,

Gilles.

736
Views
0
Helpful
1
Replies
CreatePlease to create content