Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ACE: ifmgr process spiking every 15 seconds

The following output is the command sh proc cpu | i ifmgr run every second for 1 minute.

896 6154 1923109 3 0.0 0.0 % 7.20% 7.54% ifmgr

896 6648 1923494 3 0.0 22.55% 8.43% 7.79% ifmgr

896 6648 1923494 3 0.0 22.55% 8.43% 7.79% ifmgr

896 6648 1923494 3 0.0 22.55% 8.43% 7.79% ifmgr

896 6648 1923494 3 0.0 22.55% 8.43% 7.79% ifmgr

896 6648 1923494 3 0.0 22.55% 8.43% 7.79% ifmgr

896 6648 1923494 3 0.0 2.65% 7.96% 7.71% ifmgr

896 6648 1923494 3 0.0 2.65% 7.96% 7.71% ifmgr

896 6648 1923494 3 0.0 2.65% 7.96% 7.71% ifmgr

896 6648 1923494 3 0.0 2.65% 7.96% 7.71% ifmgr

896 6648 1923494 3 0.0 2.65% 7.96% 7.71% ifmgr

896 6648 1923494 3 0.0 0.0 % 7.33% 7.58% ifmgr

896 6648 1923494 3 0.0 0.0 % 7.33% 7.58% ifmgr

896 6648 1923494 3 0.0 0.0 % 7.33% 7.58% ifmgr

896 6648 1923494 3 0.0 0.0 % 7.33% 7.58% ifmgr

896 6648 1923494 3 0.0 0.0 % 7.33% 7.58% ifmgr

896 6971 1923576 3 0.0 0.0 % 6.74% 7.45% ifmgr

896 602 1923754 0 0.0 0.0 % 6.74% 7.45% ifmgr

896 782 1924041 0 0.0 0.0 % 6.74% 7.45% ifmgr

896 782 1924041 0 0.0 0.0 % 6.74% 7.45% ifmgr

896 782 1924041 0 0.0 0.0 % 6.74% 7.45% ifmgr

896 782 1924041 0 0.0 25.47% 8.32% 7.77% ifmgr

896 782 1924041 0 0.0 25.47% 8.32% 7.77% ifmgr

896 782 1924041 0 0.0 25.47% 8.32% 7.77% ifmgr

896 782 1924041 0 0.0 25.47% 8.32% 7.77% ifmgr

896 782 1924041 0 0.0 0.0 % 7.65% 7.64% ifmgr

896 782 1924041 0 0.0 0.0 % 7.65% 7.64% ifmgr

896 782 1924041 0 0.0 0.0 % 7.65% 7.64% ifmgr

896 782 1924041 0 0.0 0.0 % 7.65% 7.64% ifmgr

896 782 1924041 0 0.0 0.0 % 7.65% 7.64% ifmgr

896 782 1924041 0 0.0 0.0 % 7.65% 7.64% ifmgr

896 782 1924041 0 0.0 0.0 % 6.4 % 7.51% ifmgr

896 875 1924104 0 0.0 0.0 % 6.4 % 7.51% ifmgr

896 1607 1924197 0 0.0 0.0 % 6.4 % 7.51% ifmgr

896 2031 1924435 1 0.0 0.0 % 6.4 % 7.51% ifmgr

896 2031 1924435 1 0.0 0.0 % 6.4 % 7.51% ifmgr

896 2031 1924435 1 0.0 24.57% 8.52% 7.81% ifmgr

896 2031 1924435 1 0.0 24.57% 8.52% 7.81% ifmgr

I can guess it's interface manager. The debug ifmgr all command does not display any output. I don't have any timers set to 15 seconds, and am still looking through defaults, and have not found any. ARPs are every 10 seconds.

Any idea what is causing this?

Also, where i can find out exactly what this task does?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ACE: ifmgr process spiking every 15 seconds

this is normal.

The interface stats are downloaded every 15 sec by the supervisor.

Gilles.

2 REPLIES
Cisco Employee

Re: ACE: ifmgr process spiking every 15 seconds

this is normal.

The interface stats are downloaded every 15 sec by the supervisor.

Gilles.

Community Member

Re: ACE: ifmgr process spiking every 15 seconds

Thanks again Gilles. :)

528
Views
0
Helpful
2
Replies
CreatePlease to create content