yes ACE interface on server vlan should be gateway. routed mode implies layer 2 adjacency of servers and ace. If ace is not the gateway and you are not doing source nat on ace then servers would respond around the ace to client via it's gateway. unless specifically configured for direct server return client would be seing response from server address rather than vip resulting in failure.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...