Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

ACE is not booting up

Hi Team,

In the ACE console, we are seeing

uncompressing linux... ok booting the kernel

But box is not booting up. Kindly suggest is this a hardware issue?

Regards,

Ranjith

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

ACE is not booting up

Hi Ranjith,

Do you have a screen and/or keyboard connected to a device, by chance? If yes, you will need to disconnect them, reboot and see if it boots normally.

Also can you attach all the console output during the boot process?

Regards,
Siva

2 REPLIES
Cisco Employee

ACE is not booting up

Hi Ranjith,

Do you have a screen and/or keyboard connected to a device, by chance? If yes, you will need to disconnect them, reboot and see if it boots normally.

Also can you attach all the console output during the boot process?

Regards,
Siva

New Member

ACE is not booting up

Hi Siva,

After disconnected the pheripheral, and reboot box is up and running.

Thanks for your support.

Regards,

Ranjith

667
Views
0
Helpful
2
Replies
CreatePlease to create content