Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE License Problem

Hi,

I've a problem with license install procedure on ACE. If I try to perform cisco procedure:

LICENSE KEY INSTALLATION INSTRUCTIONS

After you have received the software license key for a new or upgraded license in an e-mail from Cisco Systems, you must copy the license file to a network server and then use the copy command in Exec mode to copy the file to disk0 on the ACE. The syntax for this command is:

3-4

copy tftp://server_name/path_filename disk0:

The arguments are:

. server_name-Network server where you copied the license file.

. path_filename-URL location of the license file and the name of the file.

. disk0:-Flash disk in the ACE.

For example, to copy the ACE-VIRT-020.lic license file from the license directory on the track network server, enter:

host1/Admin# copy tftp://track/license/ace-virt-020.lic disk0:

To install a new software license on your ACE or to update an existing license to increase the number of virtual contexts, use the license install command in Exec mode. The syntax of this command is:

license install disk0:filename

The arguments are:

. disk0:-Flash disk in the ACE.

. filename-Filename for the license file.

For example, enter:

host1/Admin# license install disk0:ACE-VIRT-020.lic

I received this message:

Installing license... failed: License server does not support this feature

Could somebody help me?

Regards,

Dino

  • Application Networking
3 REPLIES
Bronze

Re: ACE License Problem

Hi Dino,

the first license that i received was a text file with ASCII DOS control codes but the ACE needs Unix/Linux style ASCII control codes.

If you have Linux machine around you should be able to use the programm dos2unix and convert it.

There are also Editors around which can save the file in DOS or UNIX flavor.

Anyhow if the license file is converted and you created an online lincse this should work.

Copy the file with tftp: to disk0: and use license install disk0:name.lic.

Hope it helps.

Roble

New Member

Re: ACE License Problem

Hi Roble,

thank you for your suggest. I try to convert in unix/linux ascii...but I have same problem.

I will be try to contact Cisco Tac.

Regards,

Dino

New Member

Re: ACE License Problem

Hi Roble,

maybe I understand what's the problem. If i show file .lic there is:

"INCREMENT ACE-AP-04-LIC"

this licese is wrong, my module ACE20-MOD-K9

doesn't accept the license.

Thanks for support.

Dino

693
Views
0
Helpful
3
Replies
This widget could not be displayed.