Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE Load balancing with different source IP

  Dear All ,

             I am very much new to ACE . We are deploying it on our enterprise infrastructure (10.x.x.x/8) . I have a setup like this, we have 5 Proxy server which is supporting for our enteprise internet needs . Load balancing to this 5 blue coat proxy server is done via ACE module .

  My customer is having special requirement based on specfic source subnet , ACE need to redirect the that specific source subnet to a particular proxy server . Is this possible in ACE ?? or we need to have separate Virtual server group for that specific source subnet range  . kindly correct me if am worng on my understanding .

Thanks

Santhoshkumar Saravanan

HTH Regards Santhosh Saravanan
2 ACCEPTED SOLUTIONS

Accepted Solutions
Bronze

ACE Load balancing with different source IP

Hi

I guess stsickiness is answer to your problem. Try static source base stickiness and point individual subnet to specific proxy.

Cisco Employee

ACE Load balancing with different source IP

Hi Saravanan,

Please refer the following link :

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_2_0/configuration/slb/guide/sticky.pdf

Look at section :

IP Address Stickiness Configuration Quick Start

For example :

8. (Optional) Configure static IP address sticky entries up to a maximum of

65535 static entries per context.

host1/Admin(config-sticky-ip)# static client source 192.168.12.15

destination 172.16.27.3 rserver SERVER1 2000

The above may fulfill your requirement.

regards,

Ajay Kumar

4 REPLIES
Bronze

ACE Load balancing with different source IP

Hi

I guess stsickiness is answer to your problem. Try static source base stickiness and point individual subnet to specific proxy.

New Member

ACE Load balancing with different source IP

Dear Gaurav,

                Thanks for your response , I am new to ACE can i have some sample example or document to have more understanding on this topic .Thank you ..

HTH Regards Santhosh Saravanan
Cisco Employee

ACE Load balancing with different source IP

Hi Saravanan,

Please refer the following link :

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/vA4_2_0/configuration/slb/guide/sticky.pdf

Look at section :

IP Address Stickiness Configuration Quick Start

For example :

8. (Optional) Configure static IP address sticky entries up to a maximum of

65535 static entries per context.

host1/Admin(config-sticky-ip)# static client source 192.168.12.15

destination 172.16.27.3 rserver SERVER1 2000

The above may fulfill your requirement.

regards,

Ajay Kumar

New Member

ACE Load balancing with different source IP

Dear Ajay & Gaurav

           Thanks much for your response & apprecitated .

HTH Regards Santhosh Saravanan
426
Views
0
Helpful
4
Replies
CreatePlease login to create content