Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE Logging


I want to enable the logging on the ACE appliance which is running in the multiple context mode. I want to see the log in case any VIP server or real server goes down it should send the trap or log to the syslog server. My ACE is running in routed mode and i want to have only specific logging in case any monitored service or server goes down.

Please let me know how to enabel on require logging and syslog.

New Member

Re: ACE Logging


Can anybody help me out. Last day I enabled the logging but this causes the ACE to slow down and i was hardly able to log in.

before loggin the following was the configuraiton.

show logging

Syslog logging:                 disabled

but when i just entered the following command.

logging enable. I got disconnected and hardly i was able to disable the logging.

Please let me know how to enable only specific logging so that when one VIP server is not accessible it will send the log to syslog.

Please help me out.