Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE Modual and ICMP

I have two redundant ACE mods, running 3.0(0)A1(6.1). They appear to be corrupting/dropping ping packets, but only to "reals" that live on the ACE. If I ping through the ACE no problem, if I transfer large FTP file to "real" or VIP no problem. However, if I ping the "reals" and capture traffic with a sniffer, I see bad check sums, missing packets, etc. It displays this behavior to all servers that live on ACE, system resources and network load are not an issue.

3 REPLIES
Cisco Employee

Re: ACE Modual and ICMP

First, you should really consider running A2(1.0a) or the next one A2(1.1) which should be out this week.

If the problem persist, open a sercice request with the TAC so we can analyse the data you have.

Gilles.

New Member

Re: ACE Modual and ICMP

Is the A2 train the current version recommended by Cisco? These devices load balance critical systems so we usually try and stay with Safe Harbor code were ever possible. In my deployment I require stability over features and in the past have stayed away from the "newest" code releases for fear of flaky or buggy behavior.

Thanks

Cisco Employee

Re: ACE Modual and ICMP

Yes we do recommend A2.

We are not making any fixes for A1 anymore and you are already missing a lot of important fix.

Gilles.

126
Views
0
Helpful
3
Replies