Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE module configuring NTP

I tried to configure an NTP Server and / or peer as described in the ace_adgd but the command NTP is not even there in the configuration mode of the Admin context. Is there a known issue with software version A2(1.0) or is there a configuration dependancy relating to ntp ? Many thanks in advance for your help and kind regards,

Andre

2 REPLIES
Silver

Re: ACE module configuring NTP

There is no possibility to configure NTP on an ACE module.

The ACE will take the time settings from the Supervisor.

Hope this helps.

Regards,

Dario

New Member

Re: ACE module configuring NTP

Thanks Dario.

I just configured the timezones similar to SUP settings by hand and will check if it works.

Cheers, Andre

1045
Views
0
Helpful
2
Replies