Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE module equivalent of a source nat group on CSS?

I need a web server behind the ACE module to source traffic out to a device to pull information (part of the application flow). I know that there was a source nat group within the CSS that would allow for this. Is there an equivalent in the ACE module?

1 REPLY
Cisco Employee

Re: ACE module equivalent of a source nat group on CSS?

You create a nat-pool under the outgoing interface.

Then you create a class-map to match the traffic that needs to be nated.

Then you create a policy-map, match your class-map and select the nat-pool of the outgoing interface.

ie:

policy-map multi-match NAT1

class NAT1

nat dynamic 1 vlan 30

Finally, apply the policy-map to the incoming interface.

Gilles.

177
Views
0
Helpful
1
Replies