ACE Module: Recover a real server probe-failed status
How does the ACE module recover a real server that has entered a probe-failed status state? We are doing some testing, purposely dropping a servers interface. ACE recognizes the server as being down and show it in a probe-failed state. When we bring the system's interface back up, will ACE see this and automatically bring the state back into Operational status, or does someone have to do something on the ACE module?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...