I have 2 locations, each with 2 6509+ACEs installed. I need some contexts to failover to the local switch, and some to failover to the other site. However, only one peer can be configured. Is there a way around this limitation?
They will be. The sites are not far apart, just different buildings on a campus. We will have fibre modules and direct links *not* going over the core. i will be trunking the ft vlans across. I am considering recommending GSS though, as with the current set up I will have to advertise the same networks from 2 different CEs.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...