I found out that the sup720-3b adds a 23bytes zero-byte padding to exact the frames corresponding to the failing ping probe. I saw this by spanning the internal te4/1 port from the switch to the ACE to a sniffer.
The strange thing is that the frame is padded although it's larger than the minimum frame size of 64 bytes.
When I configure a log-input ACL on the sup720-3b to force the traffic to be routed by the MSFC3 instead of the PFC3 then the ping probe works and the same frames are not padded any more!!
We run IOS modularity on the sups and according to the 12.2SX release notes they do not support the ACE. I suppose that's the root cause. We will change the sup sw ASAP.
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...