Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE-ping to rservers inconsistent

the real servers Inconsistent , sometimes pinging , sometimes request time out

i have three Real Server , it is either all pinging , or all not pinging

if i do clear arp , it is start pinging again

i don't have this issue in the other context ( i have two servers in the other context)

4 REPLIES
Cisco Employee

Re: ACE-ping to rservers inconsistent

what ace software version ?

Did you try to take a sniffer trace to see if the server gets the echo request and if it responds ?

Check the server arp table when there is failure.

do you have probes going to those servers?

Gilles.

New Member

Re: ACE-ping to rservers inconsistent

Software

loader: Version 12.2[120]

system: Version 3.0(0)A1(3b) [build 3.0(0)A1(3b) adbuild_12:39:01-2006/11/14_/auto/adbu-rel/ws/REL_3_0_0_A1_3B]

system image file: [LCP] disk0:c6ace-t1k9-mz.3.0.0_A1_3b.bin

installed license: ACE-SEC-LIC-K9 ACE-SSL-05K-K9

1-my ace software is old as you can see above

2- i didn't try sniffer trace

3- i did show arp , the three servers is existing , status UP

4- there is no probe configured yet

many thanks

Cisco Employee

Re: ACE-ping to rservers inconsistent

I think an upgrade to A1(6.3a) would be the best thing to do first.

There a lot of fixes related to arp since your image.

Gilles.

New Member

Re: ACE-ping to rservers inconsistent

dear gilles,

thanks for your help

i just upgrade , but the same problem

no continuouse ping

Software

loader: Version 12.2[120]

system: Version 3.0(0)A1(6.3a) [build 3.0(0)A1(6.3a) adbuild_02:16:25-2008/

02/02_/auto/adbu-rel3/ws/rel_3_0_0_a1_6.3-throttle/REL_3_0_0_A]

system image file: [LCP] disk0:c6ace-t1k9-mz.3.0.0_A1_6_3a.bin

installed license: ACE-SEC-LIC-K9 ACE-SSL-05K-K9

117
Views
0
Helpful
4
Replies