I have a proxy solution implementated and using squid. We want to do a loadbalance proxy services. Ex: two real ip servers with two proxy service (port 3128 and 8080). How can we do this using Cisco ACE module?
The problem is: 50% of the users are configurated to use the port 3128 on the IE proxy settings and other 50% to use the port 8080. We want to set up all users IE proxy settings to use one single port (Ex. 5555). When these users try to use the internet they will send the request to ACE than ACE will change the port destination (3128 or 8080) and send to the servers.
so what you want is the users connect to the proxy VIP on the ACE to port 10.1.240.10:5555 and the ACE balances these request over the proxy servers on ports server 1 port 3128+8080 and server 2 port 3128+8080? Is this correct?
This should work:
class-map match-all L4VIPCLASS
2 match virtual-address 10.1.240.10 tcp eq 5555
ip add x.x.x.x
ip add x.x.x.x
rserver server1 3128
rserver server1 8080
rserver server2 3128
rserver server2 8080
This way, all requests for internet will be load-balanced over your proxy servers on ports 3128 and 8080, but your clients will only send traffic to 5555.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...