Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ACE: Problem dual proccesor server predisctor least-load and 2 oids

Hello,

I have a problem, I have configured predictor least-loaded and probe snmp in ACE, My Servers are dual core proccesor. the oids are:

oid .1.3.6.1.2.1.25.3.3.1.2.1 and oid .1.3.6.1.2.1.25.3.3.1.2.2

In 1 context (integracion1) I configured oid .1.3.6.1.2.1.25.3.3.1.2.1 and the other context (integracion2) I configured oid .1.3.6.1.2.1.25.3.3.1.2.2 and the results was positive, but when I configure 2 oid in integracion2 the output says FAILED, I need sense 2 proccesors to balance. how can do it? when I configure .1.3.6.1.2.1.25.3.3.1.2 (2 proccesors) the output says FAILED

I attachment 3 configurations

Best Regards

1 REPLY
Cisco Employee

Re: ACE: Problem dual proccesor server predisctor least-load and

when you use multiple oid's on a probe , you need to manually configure the weight and make sure weights add up to 16000 so your probe should be configured as follows:

probe snmp test-server

interval 4

faildetect 2

passdetect interval 10

receive 2

community public

oid .1.3.6.1.2.1.25.3.3.1.2.1

threshold 75

weight 8000

oid .1.3.6.1.2.1.25.3.3.1.2.2

threshold 75

weight 8000

223
Views
0
Helpful
1
Replies