Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

ACE:Problem with comunication between loadbalance servers and noloadbalance

Hello,

I have a problem, I've configured loadbalance in ACE Module (Switch C6513). the network of real servers is 10.24.8.0/24 and the network of VIP servers is 10.24.16.0/24. I can access to 10.24.16.12 (HTTP, HTTPS, etc) from all networks except 10.24.8.x (10.24.8.200 to 10.24.16.11, 10.24.8.201 to 10.24.16.11 for icmp is ok, but HTTP, HTTPS is not working) that is out of loadbalance, the default gateway is diferent that balance servers. for the loadbalance servers the default gateway is 10.24.8.5 and for the servers that is out of loadbalance is 10.24.8.1

Thank you

Best Regards

1 REPLY
Cisco Employee

Re: ACE:Problem with comunication between loadbalance servers an

to access your vip from the server subnet you need to perform client nating.

So configure a policy-map to nat traffic coming from the server subnet.

Apply this policy-map to the server vlan and everything will work.

Gilles.

150
Views
0
Helpful
1
Replies
CreatePlease to create content