Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE Redundancy - Two Module

i have two ACE Module in different chaisses

i want to make Data-Center1 primary for all contexts and Data-Center2 standby for all contexts

there is no commands Primary unit and standby unit like FWSM

how to acheive that?

4 REPLIES
Bronze

Re: ACE Redundancy - Two Module

You achieve this by associating a priority to each FT group.

Example:

ft group 1

peer 1

priority 150

peer priority 110

associate-context Admin

inservice

ft group 2

peer 1

priority 150

peer priority 110

associate-context Foo-Bar

inservice

----

That's all you need. For further details have a look at the ACE-Admin Guide.

http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/administration/guide/redundcy.html#wp999520

Roble

New Member

Re: ACE Redundancy - Two Module

thanks

what about SSL Certificat and SSL Key does they replacated to the second ACE or we need to export and import them to the second ACE

Silver

Re: ACE Redundancy - Two Module

You'll need to export and re-import into the contexts on the second ACE. If there is a difference in the files then replication will stop working.

HTH

Cathy

Bronze

Re: ACE Redundancy - Two Module

Yup, certificates and keys have to be manually imported on both ACE's.

Roble

157
Views
0
Helpful
4
Replies