I have a new costumer with 3 vlans in her network (vlan7, vlan4 y vlan148) and bought an ACE module.
I read in the âRouting and Bridging Configuration Guideâ that a ACE support share Vlans: Multiple vlans interfaces within the same subnet in different contexts. Also says that only routed interfaces can be shared.
If in one context the Vlan7 is working in bridge mode, then it can NOT be in routing mode in another context?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...