ACE showing many connection failures on server farm
I just upgraded my ACE blade from A2(1.0 to A2(1.5a). After the upgrade I'm seeing an enormous amount of connection failures when I run the command show server xxx. Everything appears to be running fine. I can get to the web servers. I found an old posting and they reference Bug CSCsh1478, but when I looked at this bug the problem was corrected in version A2(1.0). Any ideas of what's going on?
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...