ACE Troubleshooting: When logging to portal page it take 20secs to login
I have configured the ACE for Bridge mode and everything is fine except for one thing. That is when anyone enter our portal page and enter the username and password it takes around 20 sec to login. After login everything is fine and fastâ¦ Why that 20 sec? and its exact 20 secs..
Another thing I noticed is that anyone who login for first time from his/her PC, logs in immediately like less than 2 sec but after that when u try re-login from the same PC it takes 20 sec to login.
Just to brief you about my setup, three servers in the serverfarm running the same application. Please find my configs attached.
Why do you need native HA: The native HA feature allows two Cisco DCNM
appliances to run as active and standby applications, with their
embedded databases synchronized in real time. Therefore, when the active
DCNM is not functioning, the standby DCNM will...
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...