Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE URL rewrite issue

I need to change the URL in the request from https://www.example.com to https://www.example.com/es/example/

I have tried several ways,both using location and Host, putting the dot and the slash between brackets [.] [/] with (.*) and %1, but none of them works.

If I check with show stats http, the counter of static parse errors increments and I have only achieved counts in the headers rewritten counter when changing the requests from http://www.example.com to http://www.example.com/es/example/

Is there any issue for this feature to add slashes / to the link in the SSL service?

Thanks,

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: ACE URL rewrite issue

do you do ssl termination ?

If not, you can't modify the ssl content.

If yes, the procedure should be the same as for HTTP and you just add the ssl-proxy.

Gilles.

3 REPLIES
Cisco Employee

Re: ACE URL rewrite issue

do you do ssl termination ?

If not, you can't modify the ssl content.

If yes, the procedure should be the same as for HTTP and you just add the ssl-proxy.

Gilles.

New Member

Re: ACE URL rewrite issue

No, the request is forwarded to an access gateway...

Thanks for the reply!

New Member

Re: ACE URL rewrite issue

Wouldn't something like this work:

header rewrite request host header-value www[.]example[.]com replace www[.]example[.]com[/]es[/]example

Edit: I made the assumption that you do terminate the SSL tunnel on the ACE and that you have a SSL proxy configured to rewrite from http to https.

262
Views
0
Helpful
3
Replies