06-02-2009 06:39 PM
in ace configuration, we didn't config a vip interface or address,just creat a class map to match destination vip address. then we config loadbalance vip inservice to enable vip. but there is no vip address, how did ace enable vip inservic like CSS11500 or csm module does
thank you!
06-03-2009 12:21 AM
did you assign the service policy to an interface ?
G.
06-03-2009 01:10 AM
you mean ACE read service policy (class map) to detemine the vip address.
i remember on CSS 11500, must define a vip address, and assigne a ip address to vip.
thank you!
Li
06-14-2009 05:41 AM
Hi,
to make the vip inservice, you do this under the multi-match policy map, under the l3 class map.
Ex:
class-map match-all X-CM
match virtual-address 172.16.10.100 any
policy-map type loadbalance first-match X-L7PM
class class-default
serverfarm X-SF
policy-map multimatch SLB-SP
class X-CM
loadbalance vip inservice
loadbalance policy X-L7PM
Regards,
Amr Ahmed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide