Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

fly
New Member

ACE vip question

in ace configuration, we didn't config a vip interface or address,just creat a class map to match destination vip address. then we config loadbalance vip inservice to enable vip. but there is no vip address, how did ace enable vip inservic like CSS11500 or csm module does

thank you!

3 REPLIES
Cisco Employee

Re: ACE vip question

did you assign the service policy to an interface ?

G.

fly
New Member

Re: ACE vip question

you mean ACE read service policy (class map) to detemine the vip address.

i remember on CSS 11500, must define a vip address, and assigne a ip address to vip.

thank you!

Li

New Member

Re: ACE vip question

Hi,

to make the vip inservice, you do this under the multi-match policy map, under the l3 class map.

Ex:

class-map match-all X-CM

match virtual-address 172.16.10.100 any

policy-map type loadbalance first-match X-L7PM

class class-default

serverfarm X-SF

policy-map multimatch SLB-SP

class X-CM

loadbalance vip inservice

loadbalance policy X-L7PM

Regards,

Amr Ahmed

137
Views
0
Helpful
3
Replies
CreatePlease login to create content