I have 2 servers to do loadbalance. they are running VMWARE, they have 4 servers inside of real server. each vmware server only has 1 port connected to Switch, if I want to balance one of them? how do I do?
It shouldn't make any difference whether the servers are real or virtual. The ACE works on IP addresses and VLANs. How you configure the context will depend on your network. You may need to use source NAT or you might be able to just use the network as is. It all depends on how you have configured your network.
You'll need to balance across real physical servers to maximise resilience though.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...