Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE with cache engine "spoof" mode

If Cache Engine use spoof mode, how ACE be configured for support this mode. Have it any command add into ACE?

New Member

Re: ACE with cache engine "spoof" mode

I am looking into this myself. Can the ACE work in this fashion:

Clients VLAN 10

Internet VLAN 20

Cache Servers VLAN 30

Traffic that comes in from clients on vlan 10, any of it that is tcp port 80, send to the cache on vlan 30. Traffic coming back from the internet, vlan 20, if its tcp port 80, send to the cache on vlan 30.

Its basic layer 4 redirection. But when the traffic goes to the cache, the cache is not going to use its own IP to make the internet request, its going to use the clients IP, this is why a map is needed on vlan 10 and vlan 20, to ensure traffic is pipelined thru the ace. Has anyone done this?