Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE with multiple context

hi,

i've 4 virtual context in my ACE configuration.it's possible to use the same real server in multiple context?2 context are configurated in one-arm mode

and 2 in bridge mode.

tks all

Aghibear

4 REPLIES
Cisco Employee

Re: ACE with multiple context

You can, but then you absolutely need to use client-nat to make sure the response from the server goes back to the appropriate context.

If the request came in on contextA and your default gateway is set to be contextB, you can't let the response from the server go to contextB since this context has no clue about the connection that came through context A.

So be very careful with what you do.

Gilles.

New Member

Re: ACE with multiple context

hi,

so if my real server work with 2 different context we need to create 2 client-nat.one for context.

it's correct?

do you know some link about ACE example??

tks

Aghibear

Cisco Employee

Re: ACE with multiple context

you could use one context as the default path - selecting this contect as the default gateway.

Then the other context uses client nat to guarantee that the response comes back.

I don't know if there is a specific example for what you want to do.

You can check sample configs from :

http://docwiki.cisco.com/wiki/Main_Page

G.

New Member

Re: ACE with multiple context

i try this configuration

tks

Aghibear

345
Views
0
Helpful
4
Replies