I'm trying to figure out how to configure the AXG to answer & redirect for multiple virtual ip addresses. I see how I can setup the virtual web applications to answer on the AXG's mgmt interface, but how do I configure the AXG to answer on other ip addresses?
Server IP RServer IP
10.1.1.1:80 -> WAF#1 -> 192.168.1.1:80
10.1.1.2:80 -> WAF#1 -> 192.168.1.2:80
10.1.1.3:80 -> WAF#1 -> 192.168.1.3:80
I see that I can setup "HTTP Ports and Hostnames", but what needs to be configured for this to work?
It looks like multiple ip addresses can be configured through the console, is this all that is required? Do I need to setup listening ports for these new ip addresses or how do I get the WAF to proxy for multiple "virtual ip addresses"?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
Introduction Prepositioning is a powerful tools on the WAAS platform but
it is not always easy to figure out why your jobs are failing when
trying to retrieve the files.Here is a method that should help you to
figure out the reason why they are not succes...