Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ACE20 Health Check Failed

L4 Model : ACE20-MOD-K9

One Server Operational TCP Services

Other TCP Services OK but TCP 5050 Service Not OK

 

I Tested from my pc

telnet 172.17.1.235 5050 Success

but ACE20 Health Check Failed

 

probe       : PROBE5050
 type        : TCP
 state       : ACTIVE
 description :
----------------------------------------------
   port      : 5050    address     : 0.0.0.0         addr type  : -          
   interval  : 2       pass intvl  : 2               pass count : 3   
   fail count: 3       recv timeout: 10  
   conn termination : GRACEFUL 
   expect offset    : 0         , open timeout     : 4        
   expect regex     : -
   send data        : -
                       --------------------- probe results --------------------
   probe association   probed-address  probes     failed     passed     health
   ------------------- ---------------+----------+----------+----------+-------
   real        : 172-17-1-235[5050]
     serverfarm: BKMWEB#5
                       172.17.1.235    491        486        5          FAILED

   Socket state        : CLOSED
   No. Passed states   : 0         No. Failed states : 1
   No. Probes skipped  : 441         Last status code  : 0
   No. Out of Sockets  : 0         No. Internal error: 0
   Last disconnect err : Connection refused by server
   Last probe time     : Wed Apr  2 20:04:44 2014
   Last fail time      : Wed Apr  2 19:33:30 2014
   Last active time    : Never

What is this Cause?  Help me

1 REPLY
Cisco Employee

Hi Tae,The last disconnect

Hi Tae,

The last disconnect error says "connection refused by server". I guess only way for us to know what exactly is going on is to take a packet capture on switch where server and ACE are connected and see what is going on. May be server is not replying to ACE. Why? I guess only packet capture can clear that since telnet from your pc worked. Also, your interval time is very less. Please increase it to at least 10-20 seconds.

Regards,

Kanwal

55
Views
0
Helpful
1
Replies
CreatePlease login to create content