The content-rewrite happens for the response data based on the amount of data that HTTP module received from TCP. By default, HTTP receives upto 32K bytes (including headers) of response data (Default TCP buffer share is 32K ). Hence the content-rewrite works fine up to first 32K response data, if the response data is more than 32K then ACE will send out the remaining data without doing any content-rewrite.
If you want to send more data from TCP to HTTP then you can increase the tcp buffer-share size to upto 48K, then ACE will do the content-rewrite for the first 48K response data and bypasses the remaining response data without content-rewrite.
parameter-map type connection conn-tcp
set tcp buffer-share 49152
Note We have observed ACE is taking more time to do content-rewrite for large response files, (For one GET request of 48K byte data with content-rewrite is taking approximately 6 seconds.)
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...