Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

ACE4710 issue with NAT and traffic between RSERVERs

I had a simple scenario: 2 servers farms (each with two rservers) one for HTTP and another for FTP. Two VIPs

Everything works fine, but when I try to access from one Rserver from the HTTP to the FTP-VIP nothing happend

How can I resolve the traffic between two RSERVER via the VIP?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

ACE4710 issue with NAT and traffic between RSERVERs

Hi

You need to add some more detail of your toplogy. but what i assuming is that all four servers [HTTP and FTP] are in same subnet, thats why when HTTP rserver hit FTP VIP reply from FTP will hit directly. If this is the case, you have to configured NAT on this server side VLAN interface.

2 REPLIES
Bronze

ACE4710 issue with NAT and traffic between RSERVERs

Hi

You need to add some more detail of your toplogy. but what i assuming is that all four servers [HTTP and FTP] are in same subnet, thats why when HTTP rserver hit FTP VIP reply from FTP will hit directly. If this is the case, you have to configured NAT on this server side VLAN interface.

New Member

ACE4710 issue with NAT and traffic between RSERVERs

Yes. That was the issue.

I solve it by applying the concepts explained in

http://2and2is5.wordpress.com/2010/10/04/when-to-use-source-nat-on-the-cisco-ace/

THANKS Alot!!

283
Views
0
Helpful
2
Replies